MAGNETIC SIGN TIPS

1. PREPARATION
Prepare the surface of the vehicle and the brown magnetic side of the sign by cleaning and drying before application of the sign

2. APPLICATION
Place one edge of the sign at the designated area of the metal surface. Allowed the remainder of the sign to contact the metal surface. If the alignment of the sign is incorrect, remove and reposition. To avoid stretching of the sign, do not straighten sign by pulling when it is affixed to the vehicle. It is important that the entire magnetized side of the sign adheres to the steel surface to avoid air pockets.

3. TEMPERATURE
The temperature of the surface of the vehicle is unimportant; however, the sign should be at least 15C degrees for installation

4. CLEANING
To avoid moisture collecting between the sign and the vehicle, the sign should be removed once a week. Wipes dry both the sign and the vehicle. Use a mild detergent in warm water to clean the vinyl surface of the sign.

5. ROLLING
To protect the sign from damage, avoid wrinkling. Roll the sign with the printed surface on the outside.